Modified Pump 250+ PSI on M15 and water with cover to prevent any water from intruding into pump

Progressive controller preset for the Camaro LS based platform.

Can use 100% methanol and/or any mix thereof with water.

Custom Relay to transfer power from Fuse box to controller eliminating any interference from the system and vehicle electronics.

GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions.

3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal.

The post Alkycontrol Methanol Injection 2010 Camaro appeared first on Hartline Performance.

Modified Pump 250+ PSI on M15 and water with cover to prevent any water from intruding into pump

Progressive controller preset for the C5 LS based platform.

GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions.

3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal.

This is a complete kit. Down to the OEM grommets that are replaced on the reservoir, cap for reservoir, plug for tank, stainless steel hardware to mount pump, vehicle specific instructions, etc.

Pre-taped pump fittings

90 micron in-line filter

The post Alkycontrol Methanol Injection C5 Corvette appeared first on Hartline Performance.

Modified Pump 250+ PSI, protective cover to keep water from intruding into motor, custom built

Progressive controller preset for the C6 LS based platform.

Custom Relay to transfer power from Fuse box to controller eliminating any interference from the system and vehicle electronics.

GM Delco 2 bar MAP sensor with regulator to read boost and supply signal to controller. Same sensor can be utilized for SD conversions.

3 teflon lined braided hoses with pressed on ends custom length. Hose feature AN fittings. Meaning a wrench is needed to install and secure hoses. No push-in deal.

This is a complete kit. Down to the custom tank fitting and grommet for the reservoir, cap for reservoir, plug for ww pump, stainless

The post Alkycontrol Methanol Injection C6 Corvette appeared first on Hartline Performance.

Modified Tank with vented cap and low level sender

Modified Pump 250+ PSI on M15 and water

Progressive controller preset for the GMC truck with horizontal panel

2 teflon lined braided hoses with pressed on ends custom length

1 Braided hose with pressed on end, collar and clamp

Pre-taped pump fittings

90 micron in-line filter

M15 15 GPH Nozzle

Mini overflow tank to replace coolant tank

And a custom relay assembly to eliminate dash interference

All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.

Not to be confused with a generic kit. Will not fit any other application without major modifications. If you need a vehicle specific kit, please contact us.

The post Alkycontrol Methanol Injection GMC Syclone Typhoon appeared first on Hartline Performance.

New Modified Tank with Flare outlet adapter and low level sender

Modified Pump 250+ PSI on M15 and water. New cover to keep water out of motor.

Progressive controller preset for the Buick with Vertical panel

3 teflon lined braided hoses with pressed on ends custom length

Pre-taped pump fittings

90 micron in-line filter

M15 15 GPH Nozzle

Mini overflow tank to replace coolant tank

Low level LED to go in the “Low Fuel” slot of the dash.

And a Power Injection bulb to go in that slot in your dash.

All wiring is weather pack, split loom tubing, cable ties, connectors, …. More in Info Section

The post Buick GN/Regal Alky Control Kit with 3 Bar MAP Sensor appeared first on Hartline Performance.

New Modified Tank with Flare outlet adapter and low level sender

Modified Pump 250+ PSI on M15 and water. New cover to keep water out of motor.

Progressive controller preset for the Buick with Vertical panel

3 teflon lined braided hoses with pressed on ends custom length

Pre-taped pump fittings

90 micron in-line filter

M15 15 GPH Nozzle

Mini overflow tank to replace coolant tank

Low level LED to go in the “Low Fuel” slot of the dash.

And a Power Injection bulb to go in that slot in your dash.

All wiring is weather pack, split loom tubing, cable ties, connectors, …. More in Info Section

The post Buick GN/Regal Alky Control Kit (NO 3 Bar) appeared first on Hartline Performance.